Data Sheet for Sprinkler Irrigation System

A. Raw Material Requirement Reference
Designation (MRS) 6.3, 8.0 & 10 Mpa at 20ºC IS;14151(pt-1); 1999
Melt Flow Rate (I5) 0.2 to 1.10 Gm/10 min. at 190º C IS;14151(pt-1); 1999
Density 940.4 to 958.4 Kg/cm3 IS;14151(pt-1); 1999
B. Dimension As per table IS;14151(pt-1); 1999
Length 3.0 to 6.0m or as agreed between manufacturer and Purchaser. IS 14151 (pt-1): 1999
Visual Appearance (Surface Finish) Satisfactory IS 14151 (pt-1): 1999
C. Performance Requirement
Heat Reversion Test Max 3% IS 14151 (pt-1): 1999
Hydrostatic Pressure Resistance Test QUALITY TEST IS 14151 (pt-1): 1999
Duration: 165 hrs. at 80ºC, Stress Values : 3.5 Mpa
ACCEPTANCE TEST
Duration : 48 hrs at 80º C ,Stress Values: 3.8 Mpa
Fusion Compatibility Test QUALITY TEST IS 14151 (pt-1): 1999
Duration: 165 hrs at 80º C, Stress Values : 3.5 Mpa
ACCEPTANCE TEST
Duration : 48 hrs 80º C, Stress Values : 3.8 Mpa
Melt Flow Rate (I5) 0.2 to 1.10 (both inclusive) Gm/10 min. IS 2530 : 1963
Carbon Black Content & Dispersion 2.5 ± 0.5% IS 2530 : 1963
Tensile Test 19 Mpa(T/S) 500%(Elongation) IS 14151 (pt-1): 1999
Workmanship and Appearance Satisfactory IS 14151 (pt-2): 1999
Bearing Capacity of Holding Attachment The holding attachment is strong enough to withstand the pressure two times the working pressure of pipe. IS 14151 (pt-2): 1999
Leakage Test without leakage IS 14151 (pt-2): 1999
Hydraulic Proof Test The assembly shall not show any sign of localized swelling, leakage, weeping or deformation and shall not burst during the test. IS 14151 (pt-2): 1999
Weldability Test QUALITY TEST IS 14151 (pt-2): 1999
Duration: 165 hrs. at 80ºC Stress Values : 3.5Mpa
ACCEPTANCE TEST
Duration : 48 hrs at 80ºC Stress Values: 3.8 Mpa
D. Identification & Marking Colour: Black. All pipes shall be indelibly marked by hot foil embossing as per Colour code IS 14151: 1999
Class-1—–Orange
Class-2——Red
Class-3——Blue
Class-4——-Green

Do you have any product inquiry?

CONTACT US